Customer: Petrochemical industry, mining industry, generator unit, marine oil purification industry, oil refining industry, aviation industry and so on.
The shortcoming of trational method --------- filtration sand tank:
a. The micro particles contained in sand tank leak into diesel, causing polltion and damaging the equipment.
b. The sand will absorb the oil, not only the oil will be consumed, but also the filtration material will be wasted.
c. If there is a lot of free water contained in diesel, the sand will absorb the water firstly, the efficiency and effect will be affected.
d. It is difficult to deal with the waste sand, and the personnel maintenance cost is high.
Technical advantages of Jingyuan membrane filtration:
The polymer membrane material is different from traditional filtration material, since the lipophilic characteristic of membrane, the oil will pass from inside of the elements, and colloid, impurities and water will be held back on the surface. Therefore, by periodic cleaning, the elements can be used repeatedly, and the service life of them will be 2~3 years. Compared with filter sand, the consumable costs is low, and compared with filter screen, the cleaning process is convenient. So membrane filtration technology is expected to be good in the years ahead!
Recommended Model:
JY-VX Series specially designed for diesel purification.According to the characteristics of light diesel, we adopt high performance membrane filtration technology to refine the diesel,as well as to remove the impurities, colloid and water from oil. As a result, the quality level of diesel can be upgraded.
Model Type: JY-VX10 Flow Rate: 3~5 tons/h Dimension: 1050×1000×2050mm
Model Type: JY-VX20 Flow Rate: 7~10 tons/h Dimension: 1700×1100×2350mm
Model Type: JY-VX80 Flow Rate: 20~30 tons/h Dimension: 1900×1700×2450mm
Model Specification:
＞ The fourth-generation industrial membrane filtration material will beter meet the requirements of professional customers.
＞ The multistage pre-treatment system which with the most advanced technology will remove at least 70% of large particle impurities in diesel
＞ The advanced multistage and continuous water removal technology makes the equipment smaller and lighter.
＞ In order to make the drainage pipeline connection more convenient, we add a continuous valve on the maintenance free pre-treatment system.
＞ In order to prevent the high pressure caused by blocked filters, we add a pressure sensor overload protection device on the equipment.
＞ The upgraded compressed air back-blow system makes the cleaning efficiency improve 30% and the maintenance time is also shortened 20%.
Environmental Protection Trend:
As we all know, the most stringent environmental protection standard has been carried out, and the requirements for diesel quality are also higher and higher, so the application of clean diesel must be imperative! And the old method which would cause environmental pollution must be substituted by hi-tech and environmental protection method, and the most advanced polymer membrane material will also lead the market in the future! Shenyang Jingyuan Membrane Systems Co., Ltd. is just aimed at the long-term development of the new material, and applied it in industrial oil purification, which is of great significant for PM 2.5 control and energy saving.